We finished laying the solid maple floor today. It was pouring rain all day so the humidity was a little higher than we would’ve liked to see but otherwise things look really good. Thanks to our friend Don for loaning us the flooring stapler and to Ben Deumling of @zenaforestproducts for giving us a...
"Timelapse: laying the hardwood floor"Continue readingbuild blog
Installing the hardwood flooring, part 1
Started putting down the hardwood floors today. This is such a gratifying part of the process because it transforms the space so quickly. We like sustainably harvested hardwood floors because they are beautiful, environmentally friendly, and will last the life of the house.The flooring we are using is sustainably harvested big leaf maple that...
"Installing the hardwood flooring, part 1"Continue reading
Timelapse: casting the concrete hearth
Timelapse from our molded concrete hearth experiment. Details in yesterday’s post...
Casting a concrete hearth
Today’s experimental building project is an attempt to make a solid concrete hearth for our tiny woodstove. I like the idea of a big chunk of thermal mass to capture some of the stove heat and reradiate it for a few hours after the fire goes out. Also the simple gray block is more...
"Casting a concrete hearth"Continue reading
Everything and the kitchen sink
We’re officially in the “zillion little things” phase of building our tiny house. Wiring switches, fans, installing passive air vents, planning cabinets and built-ins. The cabinetry in tiny spaces can be a little nerve-wracking at times because everything keys off of everything else like a puzzle, so our choices and especially our measurements need...
"Everything and the kitchen sink"Continue reading
Tools We Like: Milwaukee M18 Cordless Angle Grinder
I’ve been a full time builder for over 20 years. To help new builders make smarter tool choices and also to spark no-holds-barred discussion among experienced builders, we’re adding a new segment here called Tools We Like. Today’s tool is the M18 Milwaukee cordless angle grinder. 4 1/2 inch angle grinders are indispensable for...
"Tools We Like: Milwaukee M18 Cordless Angle Grinder"Continue reading
Installing the passive air vents and bath fan
It feels good to be working on the tiny house again (this is Brian) after a 30 day work push to fill a last minute commission for some challenging traditional Inuit kayak frames (my day job, Cape Falcon Kayak, is worth checking out if you like beautiful things made of wood).After admiring the perfectly...
"Installing the passive air vents and bath fan"Continue reading
More trips to the store = more time lost
So what are we looking at here: some people would say this is the inside of a flexible 4 inch vent, and that it is, but it’s also the hose that sucks up all your time and money when you’re building a tiny house, especially if it’s your first time building a structure. As...
"More trips to the store = more time lost"Continue reading
Making up outlets
With the walls done, I’ve been using pockets of downtime to burn through some smaller tasks like making up the outlets for the house.Before closing up the walls I made sure every wire was labeled on the sheath so I could make up the boxes, and so I’ll have any easy reference for future...
"Making up outlets"Continue reading
Choosing paint
The great thing about the scale of a tiny house is that you can afford (both in money and time) to experiment with finishes you might not otherwise use. Knowing that, I really wanted to use a natural lime based paint on this project. I love the brushed, mottled texture of the finish. But...
"Choosing paint"Continue reading