Offgrid tiny house build, Days 13, 14 & 15. Brian: 10 hours total, Liz: 10 hours total. . Short days the last few days while we time work around materials pickup and the heat of some very summery days. Got the ice and water shield applied to the roof Saturday morning and then went out to pickup...
"Timelapse: installing the ice & water shield"Continue readingbuild blog
Installing the standing seam metal roof
We waited for the afternoon shade to start the metal roofing. The roof we chose is ASC Skyline, one of many reputable brands of standing seam concealed fastener roofing. I really like standing seam roofing because it’s reasonably priced, easy to install, lasts forever, and when you no longer trust it on your house...
"Installing the standing seam metal roof"Continue reading
Burning our fascia boards
Before the roof can go on we need to attach the eave fascia boards which means making some admittedly trendy charred surface wood. Done correctly, this historic Japanese wood-preserving technique is a more labor intensive process than most people have the stamina for, which is why you see so much of it looking not...
"Burning our fascia boards"Continue reading
Installing the ice & water shield
I’m convinced that YouTube is the best thing to ever happen to makers. We watch at least 5 videos a day on how to do this or that and it’s all free. It’s not always the best advice but if you surf enough you can usually figure out who is or isn’t legit. As...
"Installing the ice & water shield"Continue reading
Timelapse: Sheathing the roof
Offgrid tiny house build, Days 12 & 13. Brian: 7 hours each day, Liz: 7 hours each day. . Finished installing any nailing needed before the roof went on, and then installed the roof sheathing. . Our roof is 105”, and rather than deal with added blocking and standard 4x8 plywood, we opted for oversized sheets to tie the...
"Timelapse: Sheathing the roof"Continue reading
Sheathing the roof
Sheeted the roof today! We are running true half-inch five ply CDX plywood transverse across the entire roof. The roof of our tiny house is 105 inches wide so we used oversized sheets to pick up the full width. 10 foot ply is nearly twice the square foot cost of 8 foot, but it...
"Sheathing the roof"Continue reading
Finishing up the roof framing
We were hoping to put the plywood on the roof today but our punch list of things to do before that step just kept growing. Something I’ve been avoiding is putting up Sheetrock nailing strips on the inside of the rake wall top plates. I just couldn’t commit to buying lumber for something so...
"Finishing up the roof framing"Continue reading
Timelapse: finishing the rafter install
Offgrid tiny house build, Day 11 Brian: 8 hours, Liz: 8 hours. . After an early morning run to the lumber yard Brian finished setting the rafters, and I was chasing his work hanging hurricane ties. I was having trouble with the nails I’d bought and realized they were the right length but wrong type and despite...
"Timelapse: finishing the rafter install"Continue reading
Finishing the rafter install
Started the day with a crack of dawn raid on the lumberyard to replace the casualties from yesterday’s debacle. Braved I-5 in morning rush hour and still made it home in time to wake Liz with morning coffee. I am basically a superhero. #boyfriendpoints.Made quick work of setting the last two rafters while Liz...
"Finishing the rafter install"Continue reading
Timelapse: installing the rafters
Offgrid tiny house build, Day 11 Brian: 4 hours, Liz: 4 hours. . Today was one of those days that should have been more productive than it actually was. Started with news from the power company that they were doing work in the area and the power would be off for the better part of the day....
"Timelapse: installing the rafters"Continue reading